Opencl Bitcoin Miner | CryptoCoins Info Club

Mining ERC-918 Tokens (0xBitcoin)

GENERAL INFORMATION

0xBitcoin (0xBTC) is the first mineable ERC20 token on Ethereum. It uses mining for distribution, unlike all previous ERC20 tokens which were assigned to the contract deployer upon creation. 0xBTC is the first implementation of the EIP918 mineable token standard (https://eips.ethereum.org/EIPS/eip-918), which opened up the possibility of a whole new class of mineable assets on Ethereum. Without any ICO, airdrop, pre-mine, or founder’s reward, 0xBitcoin is arguably the most decentralized asset in the Ethereum ecosystem, including even Ether (ETH), which had a large ICO.
The goal of 0xBitcoin is to be looked at as a currency and store of value asset on Ethereum. Its 21 million token hard cap and predictable issuance give it scarcity and transparency in terms of monetary policy, both things that Ether lacks. 0xBitcoin has certain advantages over PoW based currencies, such as compatibility with smart contracts and decentralized exchanges. In addition, 0xBTC cannot be 51% attacked (without attacking Ethereum), is immune from the “death spiral”, and will receive the benefits of scaling and other improvements to the Ethereum network.

GETTING 0xBITCOIN TOKENS

0xBitcoin can be mined using typical PC hardware, traded on exchanges (either decentralized or centralized) or purchased from specific sites/contracts.

-Mined using PC hardware

-Traded on exchanges such as


MINING IN A NUTSHELL

0xBitcoin is a Smart Contract on the Ethereum network, and the concept of Token Mining is patterned after Bitcoin's distribution. Rather than solving 'blocks', work is issued by the contract, which also maintains a Difficulty which goes up or down depending on how often a Reward is issued. Miners can put their hardware to work to claim these rewards, in concert with specialized software, working either by themselves or together as a Pool. The total lifetime supply of 0xBitcoin is 21,000,000 tokens and rewards will repeatedly halve over time.
The 0xBitcoin contract was deployed by Infernal_Toast at Ethereum address: 0xb6ed7644c69416d67b522e20bc294a9a9b405b31
0xBitcoin's smart contract, running on the Ethereum network, maintains a changing "Challenge" (that is generated from the previous Ethereum block hash) and an adjusting Difficulty Target. Like traditional mining, the miners use the SoliditySHA3 algorithm to solve for a Nonce value that, when hashed alongside the current Challenge and their Minting Ethereum Address, is less-than-or-equal-to the current Difficulty Target. Once a miner finds a solution that satisfies the requirements, they can submit it into the contract (calling the Mint() function). This is most often done through a mining pool. The Ethereum address that submits a valid solution first is sent the 50 0xBTC Reward.
(In the case of Pools, valid solutions that do not satisfy the full difficulty specified by the 0xBitcoin contract, but that DO satisfy the Pool's specified Minimum Share Difficulty, get a 'share'. When one of the Miners on that Pool finds a "Full" solution, the number of shares each miner's address has submitted is used to calculate how much of the 50 0xBTC reward they will get. After a Reward is issued, the Challenge changes.
A Retarget happens every 1024 rewards. In short, the Contract tries to target an Average Reward Time of about 60 times the Ethereum block time. So (at the time of this writing):
~13.9 seconds \* 60 = 13.9 minutes
If the average Reward Time is longer than that, the difficulty will decrease. If it's shorter, it will increase. How much longer or shorter it was affects the magnitude with which the difficulty will rise/drop, to a maximum of 50%. * Click Here to visit the stats page~ (https://0x1d00ffff.github.io/0xBTC-Stats) to see recent stats and block times, feel free to ask questions about it if you need help understanding it.

MINING HARDWARE

Presently, 0xBitcoin and "Alt Tokens" can be mined on GPUs, CPUs, IGPs (on-CPU graphics) and certain FPGAs. The most recommended hardware is nVidia graphics cards for their efficiency, ubiquity and relatively low cost. As general rules, the more cores and the higher core frequency (clock) you can get, the more Tokens you will earn!
Mining on nVidia cards:
Mining on AMD cards:
Mining on IGPs (e.g. AMD Radeon and Intel HD Graphics):
Clocks and Power Levels:

MINING SOFTWARE AND DESCRIPTIONS

For the most up-to-date version info, download links, thread links and author contact information, please see this thread: https://www.reddit.com/0xbitcoin/comments/8o06dk/links_to_the_newestbest_miners_for_nvidia_amd/ Keep up to date for the latest speed, stability and feature enhancements!
COSMiC Miner by LtTofu:
SoliditySha3Miner by Amano7:
AIOMiner All-In-One GPU Miner:
TokenMiner by MVis (Mining-Visualizer):
"Nabiki"/2.10.4 by Azlehria:
~Older Miners: Older and possibly-unsupported miner versions can be found at the above link for historical purposes and specific applications- including the original NodeJS CPU miner by Infernal Toast/Zegordo, the '1000x' NodeJS/C++ hybrid version of 0xBitcoin-Miner and Mikers' enhanced CUDA builds.

FOR MORE INFORMATION...

If you have any trouble, the friendly and helpful 0xBitcoin community will be happy to help you out. Discord has kind of become 0xBTC's community hub, you can get answers the fastest from devs and helpful community members. Or message one of the community members on reddit listed below.
Links
submitted by GeoffedUP to gpumining [link] [comments]

BETANET-R7.1 Release Announce #Bounty #SERO #Privacy #Blockchain

As per schedule, the first phase of SERO Mainnet will go live at the end of June and GPU mining will be introduced on 30th May. The network will be forked and new consensus algorithm will be implemented.

BETANET-R7.1 Release Announce

The purpose of this release is to switch the PoW algorithm from SERO-Ethash to ProgPOW and to support mining using GPU.
This algorithm will switch at 940410 block height, which is approximately Beijing time 21:00 on 30th May.
serominer download: https://github.com/sero-cash/serominereleases

Optimization of Wallet account Analysis process

With the increase in the number of blocks, the old balance analysis program (state1) has become slow, this release abandoned the state1 analysis program, changed to balance analysis program, so:

Block Reward Adjustment

Please refer to SIP3: Reward Improvement Plan (BETANET-R7.1 Content) https://wiki.sero.cash/en/index.html?file=News/Important/sip3-description

Download BETANET-R7.1 Release Packages and see detailed announcement :

https://wiki.sero.cash/en/index.html?file=News/Release/SERO-BETANET-R7.1


Official links
Official website : https://sero.cash Tencent : https://v.qq.com/x/page/s0792e921ok.html YouTube : https://youtu.be/UNG2boG49Io Twitter : https://twitter.com/SEROdotCASH Medium : https://medium.com/@SERO.CASH Github : https://github.com/sero-cash Reddit : https://www.reddit.com/useSEROofficial BitcoinTalk ANN : https://bitcointalk.org/index.php?topic=5123382.0 Linkedin :https://www.linkedin.com/company/sero-global-inc/ Facebook : https://www.facebook.com/SEROProtocol Gitter Community : https://gitter.im/sero-cash/Lobby?utm_source=share-link&utm_medium=link&utm_campaign=share-link SERO VS Zcash encryption speed comparison :https://www.youtube.com/watch?v=bc6yHTLSl5M
Telegram Community
Chinese group : https://t.me/SeroOfficialChs English group : https://t.me/SeroOfficial SERO Announcement : https://t.me/SEROannouncements SERO Official Technical Support : https://t.me/SeroFans
SERO Discord : https://discord.gg/3AZVMRU
submitted by SalomeTavartqiladze to SERO_Official [link] [comments]

New to r/Tokenmining? click here for more in-depth info!

What is EIP:918?

EIP:918 is an Ethereum Improvement Proposal for standardizing mineable token distribution using Proof of Work.
The primary driver behind the standard is to address the very broken ICO model that currently plagues the Ethereum network. Token distribution via the ICO model and it’s derivatives has always been susceptible to illicit behavior by bad actors. New token projects are centralized by nature because a single entity must handle and control all of the initial coins and all of the the raised ICO money. By distributing tokens via an alternative ‘Initial Mining Offering’ (or IMO), the ownership of the token contract no longer belongs with the deployer at all and the deployer is ‘just another user.’ As a result, investor risk exposure utilizing a mined token distribution model is significantly diminished. This standard is intended to be standalone, allowing maximum interoperability with ERC20, ERC721, and future token standards.
The most effective economic side effect of Satoshi Nakamoto’s desire to secure the original Bitcoin network with Proof of Work hash mining was tethering the coin to real computing power, thereby removing centralized actors. Transitioning the responsibility of work back onto individual miners, government organizations have no jurisdiction over the operation of a pure mined token economy. Oversight is removed from an equation whereby miners are providing economic effort in direct exchange of a cryptographic commodity. This facilitates decentralized distribution and establishes all involved parties as stakeholders. The ERC918 standard allows projects to be funded through decentralized computing power instead of centralized, direct-fiat conversion.
The Ethereum blockchain in its current state exists as a thriving ecosystem which allows any individual to store immutable records in a permission-less, invulnerable and transparent manner. Recently, there have been proposals to mitigate some initial ICO investment risks through the introduction of the DAICO model that relies on timed and automated value transfers via the smart contract tapping mechanism. However, this does not align a token smart contract as a non-security and still has the potential to put investors at risk if not implemented carefully, relying on centralized actors to be fair and community intended. Allowing users of the network direct access to tokens by performing computations as a proof of work supplies allows any smart contract to distribute a token in a safe and controlled manner similar to the release of a commodity.
As of 2017, all Ethereum token distribution methods were flawed and susceptible to Sybil attacks. A Sybil attack is a form of computer security attack where one person pretends to be many people with multiple computer accounts in order to manipulate a system in a malicious way. ICOs and airdrops are highly susceptible to these type of attacks so there is no way to verify that all ERC20 tokens distributed by the deployer were doled out fairly or unfairly. Proof of Work distribution is resistant to Sybil attacks. This means that ERC918 tokens are among the first trustless Ethereum tokens in the world. The distribution of ERC918 tokens is fair because they are allotted via an open, decentralized mathematical algorithm (that anyone can view on the mainnet blockchain) and not a centralized human monarchy.
ERC918’s first incarnation (and inspiration) was the 0xBitcoin project that launched in early 2018. Since then, several projects have realized the standard in innovative and creative ways. Catether (0xCATE) erupted early and additionally mints payback tokens during transfer operations to offset gas costs. 0xGold and 0xLitecoin each implement the first on-chain merge-mining with 0xBitcoin and the Mineable Gem project extends the standard onto a non-fungible collectible artifacts, whereby each gem has a unique mining difficulty. The Mineable project is a newer initiative that provides users with the ability to create mineable ERC20 tokens on-chain without writing a line of code and includes a virtualized hashing artifact market that allows miners to purchase on-chain vGPUs to improve mining difficulty and rewards. (written by jlogelin) ​

MINING IN A NUTSHELL

0xBitcoin is a Smart Contract on the Ethereum network, and the concept of Token Mining is patterned after Bitcoin's distribution. Rather than solving 'blocks', work is issued by the contract, which also maintains a Difficulty which goes up or down depending on how often a Reward is issued. Miners can put their hardware to work to claim these rewards, in concert with specialized software, working either by themselves or together as a Pool. The total lifetime supply of 0xBitcoin is 21,000,000 tokens and rewards will repeatedly halve over time.
The 0xBitcoin contract was deployed by Infernal_Toast at Ethereum address: 0xb6ed7644c69416d67b522e20bc294a9a9b405b31
0xBitcoin's smart contract, running on the Ethereum network, maintains a changing "Challenge" (that is generated from the previous Ethereum block hash) and an adjusting Difficulty Target. Like traditional mining, the miners use the SoliditySHA3 algorithm to solve for a Nonce value that, when hashed alongside the current Challenge and their Minting Ethereum Address, is less-than-or-equal-to the current Difficulty Target. Once a miner finds a solution that satisfies the requirements, they can submit it into the contract (calling the Mint() function). This is most often done through a mining pool. The Ethereum address that submits a valid solution first is sent the 50 0xBTC Reward.
(In the case of Pools, valid solutions that do not satisfy the full difficulty specified by the 0xBitcoin contract, but that DO satisfy the Pool's specified Minimum Share Difficulty, get a 'share'. When one of the Miners on that Pool finds a "Full" solution, the number of shares each miner's address has submitted is used to calculate how much of the 50 0xBTC reward they will get. After a Reward is issued, the Challenge changes.
A Retarget happens every 1024 rewards. In short, the Contract tries to target an Average Reward Time of about 60 times the Ethereum block time. So (at the time of this writing):
~13.9 seconds \* 60 = 13.9 minutes
If the average Reward Time is longer than that, the difficulty will decrease. If it's shorter, it will increase. How much longer or shorter it was affects the magnitude with which the difficulty will rise/drop, to a maximum of 50%. * Click Here to visit the stats page~ (https://0x1d00ffff.github.io/0xBTC-Stats) to see recent stats and block times, feel free to ask questions about it if you need help understanding it.

MINING HARDWARE

Presently, 0xBitcoin and "Alt Tokens" can be mined on GPUs, CPUs, IGPs (on-CPU graphics) and certain FPGAs. The most recommended hardware is nVidia graphics cards for their efficiency, ubiquity and relatively low cost. As general rules, the more cores and the higher core frequency (clock) you can get, the more Tokens you will earn!
Mining on nVidia cards:
Mining on AMD cards:
Mining on IGPs (e.g. AMD Radeon and Intel HD Graphics):
Clocks and Power Levels:

MINING SOFTWARE AND DESCRIPTIONS

For the most up-to-date version info, download links, thread links and author contact information, please see this thread: https://www.reddit.com/0xbitcoin/comments/8o06dk/links_to_the_newestbest_miners_for_nvidia_amd/ Keep up to date for the latest speed, stability and feature enhancements!
COSMiC Miner by LtTofu:
SoliditySha3Miner by Amano7:
AIOMiner All-In-One GPU Miner:
TokenMiner by MVis (Mining-Visualizer):
"Nabiki"/2.10.4 by Azlehria:
~Older Miners: Older and possibly-unsupported miner versions can be found at the above link for historical purposes and specific applications- including the original NodeJS CPU miner by Infernal Toast/Zegordo, the '1000x' NodeJS/C++ hybrid version of 0xBitcoin-Miner and Mikers' enhanced CUDA builds.

FOR MORE INFORMATION...

If you have any trouble, the friendly and helpful 0xBitcoin community will be happy to help you out. Discord has kind of become 0xBTC's community hub, you can get answers the fastest from devs and helpful community members. Or message one of the community members on reddit listed below.
Links
submitted by GeoffedUP to Tokenmining [link] [comments]

Analysis of Bitcoin hash as random number

So, I wanted to check to see how fair the process of selecting the winning number was using the bitcoin hash as the seed of the selection process. I was checking for two things, the first to see how fair the distribution was by using the hash as the seed, and the second to check how the modulus was affecting the results (specifically, when I took Abstract Algebra a few years ago, we did quite a bit with modulus arithmetic, and I remember it having some numerical preferences if the given modulus is not prime)
I downloaded every hash from every blockchain head from the first listed on blockchain.info until the latest one (height of 335917) as of beginning this experiment. Upon downloading each of them, I converted them to their base 10 representations. All of the hashes are accessible from this download link, in a tab-delimited file, the first field is the base 16 hash and the second field is the same hash in base 10.
Next, I started with the assumption of 100,000 participants and ran through every hash, generating the distribution of winning numbers for every participant. Once I had those, I incremented it to 100,001 participants and repeated the process. I continued this process up to 200,000 participants. For the first 50,000 of them, I generated graphs showing the distribution, just to see if I could eyeball anything peculiar. (I only generated graphs up to 151,437 as they wern't all that useful, so I stopped their generation to speed up processing time)
As you can see, from the pictures, the distribution does look pretty even and fair. It does have a bit of a wave to it. Something more interesting would be, what happens when I combine the numbers? I cannot directly combine all of them, as once I get past 100,000, the next graphs would be missing counts, since I started at 100,000. But, I can take all of them together and just look at the first 100,000 entries.
So, I combined all of the counts for the first 100,000 from each of the 100,000 sample data files (http://i.imgur.com/Us2hioU.png). Looking at those, here are the top 20 most "lucky" numbers:
Comment Number Frequency
25629 233244
99519 232466
46573 232321
10771 232291
2661 232205
11007 232194
59292 232177
80981 232139
73451 232112
73992 232077
19341 232019
57305 232011
58395 232006
91116 231992
79011 231989
80739 231959
3507 231940
93467 231933
89215 231903
86667 231896
And, here are the 20 most "unlucky" numbers:
Comment Number Frequency
81698 223588
34854 223712
37994 223842
10250 223861
95114 223898
88458 224039
79994 224043
43990 224087
22234 224177
94254 224190
8970 224198
6238 224205
87414 224206
45974 224211
28078 224220
16808 224250
30474 224272
3578 224293
30230 224319
44045 224379
NOTE: I only went from 100,000 to 200,000 participants in my estimations, because the processing time was about 100 per minute, so just to process those 100,000 trials, it took an estimated 16 hours 40 minutes. If I were to process a larger selection (such as 100,000 to 1,000,000 participants) I would need to re-design my processing to use multiple threads or use OpenCL and offload the processing to my graphics card.
TL;DR - The distribution of chosen numbers for every given hash up until the most recent (as of a day or two ago) appears to be sufficiently well distributed.
EDIT: Oops, because of the +1 in the hashing, I was off by 1 in the comment numbers in my results, I have fixed that. The distribution is still exactly the same though, so the graphs all basically remain the same.
submitted by Driagan to millionairemakers [link] [comments]

How To Mine Doge with Ubuntu 13.10. (Part 1, for AMD Graphics Cards)

I feel the community really needs a resource like this. Because if I had a Doge for every-time taught a newbie how to Mine on Ubuntu, I would be a very rich doge!
EDIT: Sorry if it looks funny, Reddit doesn't like the numbers I put in for some reason.
If you have Ubuntu you have likely not upgraded because you think you cant mine on 13.10, and while that has been true in the past, a few people have got it figured out. So feel free to upgrade. If you are not on Ubuntu, Seriously you should consider using it. Even if its just on an older desktop.
Alright, so lets get a few things clear, I am assuming that you just FRESHLY installed Ubuntu 13.10 x64 on your system. I am assuming that you have no drivers, and no miners. You will need at least a key board and a mouse. The guide will be done in several parts, this first part is for most AMD Graphics cards. If you have an Nvidia, or just want to mine with your CPU, please check back later for those guides!
When reading this guide, please remember that as I give you commands to type into the terminal, Anything between { and} must be included. Do not copy and paste the {}.
Lets get started, If you have not already done so, Install Ubuntu 13.10 64Bit From Here (http://www.ubuntu.com/index_asus.html)
*1. Lets start by making sure you are up to date. Open up the terminal and enter this:
{sudo apt-get update && sudo apt-get upgrade} 
Let that run for a bit.
*2. Once that has finished we are going to download some applications we will need:
{sudo apt-get install dh-make dh-modaliases execstack libxrandr2 libice6 libsm6 libfontconfig1 libxi6 libxcursor1 libgl1-mesa-glx libxinerama1 libqtgui4} 
*3. Once that has run its course we are going to install the ssh server. Remember this command is going to make your computer shut down. While it is shut down, carefully install your graphics cards. If you don't have any experience with this, I suggest you 3 minutes to watch this guide, because failure to install a graphics card the right way can destroy it.
(http://www.youtube.com/watch?v=O9x097QRXeA)
{sudo apt-get install openssh-server sudo shutdown now} 
*4.Install your Card(s) and turn the computer back on.
*5. Make a new folder called "AMD DRIVERS123" inside of your download folder. Downoad the following 3 things into that folder. (1. AMD Drivers: http://support.amd.com/en-us/download/incomplete) (2. AMD APP SDK: http://developer.amd.com/tools-and-sdks/heterogeneous-computing/amd-accelerated-parallel-processing-app-sdk/downloads/) (3. AMD ADL SDK:http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/)
*6. Ok, now we need to unzip and compile those drivers. So, open a terminal my right clicking inside of "AMD DRIVERS123". The enter this:
{unzip amd-catalyst*.zip chmod +x amd-catalyst*.run} {sudo ./amd-catalyst*.run --buildpkg Ubuntu/saucy} 
*7. Now we need to install the drivers. Enter the code exactly as you see it, don't worry, the first command will fail, we are expecting it too.
{sudo dpkg -i fglrx*.deb} {sudo apt-get -f install} {sudo dpkg -i fglrx*.deb} {sudo reboot} 
Your computer should now reboot.
(If this failed, you probibly need to remove the old drivers. Do this
{cd /etc/default sudo pico grub} 
Change the line:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset" 
Now save by pressing [CTRL+x]
{sudo update-grub} this will make the change perminent. {sudo reboot -n} Reboot with new settings. Once it starts back up try installing the new drivers again.) 
*8.GREAT! You are really on a roll! Now we need to update AtiConfig
{sudo aticonfig --initial --adapter=all} 
*9.Time to install the APP ADK:
{tar xvf AMD-APP-SDK*.tgz} {sudo ./Install-AMD-APP.sh} {sudo reboot} 
*10. WOOT! You are so close to diggin that sweet Doge!! Its time to download CGMiner. IMPORTANT NOTE! You need to get CGminer 3.7, IT IS THE ONLY ONE THAT WILL WORK. Do not get any older or newer, Just this. :
{sudo apt-get install git unzip git clone -b 3.7 https://github.com/ckolivas/cgminer} 
*11. Ok, now go back to "AMD DRIVERS123", Unzip AMD SDL SDK 6.0. Once you have it unzipped, go the file called "include", open it up, copy everything inside, then go find CGminer. Copy these files into the CGminer file called ADL_SDK.
*12. To install CGminer, we are going to need a few things. Get all of these.
{sudo apt-get install build-essential autoconf libtool libcurl4-openssl-dev libncurses5-dev pkg-config libudev-dev} 
*13. Lets go ahead and compile CGminer.
{cd cgminer} {./autogen.sh} 
*14. Ok, when you did that, it told you GPU was not supported, time to fix it.
{./configure --enable-opencl --enable-scrypt} 
(if you did it right you should now get this: OpenCL...............: FOUND. GPU mining support enabled scrypt...............: Enabled ADL..................: SDK found, GPU monitoring support enabled)
*15. If everything has been good so far then
{make} 
*16. MATHEMATICAL! Now lets get it set up to run a test.
{nano test.sh} {!/bin/bash export DISPLAY=:0 export GPU_MAX_ALLOC_PERCENT=100 export GPU_USE_SYNC_OBJECTS=1} {./cgminer -n} 
*17. Now save by hitting [Control+x][y][Enter]
*18.Lastly lets CHmod test.sh
{chmod+x test.sh} 
*19. TIME TO RUN THE TEXT!!!
{./test.sh} 
(If your output looks like this your ready to go!!! CL Platform 0 vendor: Advanced Micro Devices, Inc. CL Platform 0 name: AMD Accelerated Parallel Processing CL Platform 0 version: OpenCL 1.2 AMD-APP (1214.3) Platform 0 devices: 1 0 Tahiti GPU 0 AMD Radeon HD 7900 Series hardware monitoring enabled 1 GPU devices max detected)
*20. Excellent! Now we have it installed, its time to pick 2-3 pools, and get accounts set up at each of them. I currently use These 2, and If I find another I like I'll update. If you have a really awesome pool you would like me to include on the list, feel free to message me.
Pools: http://doge.cryptovalley.com/ (great community, server not super stable, but they have a chat. I hang out here a lot under the handle 'StrongBad' feel free to stop buy and ask questions)
https://dogehouse.org/ (Super stable pool, Great contests, super friendly, and they pay your miner a bonus if you find the block!)
Choose your pools, go to their sites and sign up. VERY IMPORTANT!!! Use different usernames and passwords for every mining site. If one site gets hacked, you don't want to give them a way to steal everything!!!!! Don't worry about the worker names and passwords being unique or complex tho, the most they can do with this is mine for you.
*21. Ok, now go to the CGminer folder, and open up a Terminal Window.
{sudo ./cgminer} 
This should start ./cgminer up with some really basic settings, and not pointed at any pool. Lets fix that: First press [p] to go to pool settings Now [A] and enter the information for the 1st pool. For instance if you are signing on for dogehouse: (Input server details: stratum+tcp://stratum.dogehouse.org:3333 Username: 'yourusername.workername password: 'yourpassword') If you got no errors, you did it right! Your miner should now connect and start to mine very slowly.
Now, do the same thing for all your other pools. the reason we do this is because Doge Coin pools are constantly being DDoS attacked, and this way your worker automatically switches over to a good pool if one go's down.
*22. time to save your current settings press [Enter] to get back out to the main menu, then [s] to bring up settings. Now press [W] to write a Config file. Name it DogeCoin.conf, and make sure to save it in the location it directs you too.
*23.OK! So, now we have everything set up to its basics. What you need to do now is sit down, and fine tune your Card(s). Its really early in the morning, and I need to get some sleep, I will add more on how to tune your card tomorrow in another post, and link it HERE:
Or, I will help you find the best configuration for your card(s). However as this is quite a bit of work, I do charge a small fee. Contact me with your card(s) information and I will get back to you right away. I generally let you decide how much to pay me.
This is my first ever guide on reddit! If you enjoyed it, or if it helped you please remember to upvote! I am going to start doing an educational YouTube series about Bitcoin, and will likely be doing a side program about Doge, if I find time and funding!! You can find that here: All tips are appreciated! DPTwcQreASwzt6TeWBWFb6Kz9ZU5Sezvr9 If you have any Questions, feel free to ask, I will get back to you ASAP.
Happy Digging everybody!
submitted by Sonofchange to Dogecoinmining [link] [comments]

To the moon! Dogemining with BFGMiner, Debian, and ATI.

Visitor from the future! Hello. I'm a newbie digger and recently setup my first dedicated mining box in Debian. I'm not the most experienced Linux user, but the machine had started with Debian Squeeze and I couldn't find its old Windows key. (Also please forgive formatting errors, I'm new to this whole "Reddit" thing as well.)
I found a number of guides to misdirect me on my way, so I decided to write up a sort-of (or at least hopefully up-to-date) guide to create a Dogecoin miner on Debian with AMD cards, using BFGMiner to mine coins.
Expert digging shibes: I would certainly appreciate feedback to improve this guide.
This is not a headless mining guide. I have not reached that level of mastery yet, though I believe it is well within reach.
HOWTO
You can refer to this wiki source to understand the output from BFGMiner 3.10.0. The one gotcha I've observed is that BFGMiner will happily start off showing hash rates in KHash/sec, and after the first accepted block it will jump to MHashes/sec. When I first saw my hash speed appear to drop from "250" to "0.2", I panicked a little before seeing it had changed its orders of magnitude.
If you think you're still mining slowly, you might need to bump up the intensity for BFGMiner. Higher intensity means more work, and it's possible to create hardware failures if you set it too high. For my HD 5870s, I use an intensity of 12. You can either set the intensity by adding "-I 12" to the ./bfgminer line of doge_dig.sh, or you can adjust the value by pressing M in BFGMiner and working through the menu system from there.
Bonus: Multiple cards
What happens if I have multiple ATI cards on one rig, you ask? I had the same problem, and OpenCL would only recognize one of them! It turns out that there's an easy solution, but it costs $1.25 in resistors from your local radio shack: http://www.overclock.net/t/384733/the-30-second-dummy-plug
Plug the finished product from there into your second card. If you have more than two cards, you'll need to make one for every card you want to recognize without a monitor attached to it. Reboot and restart your mining, BFGMiner should recognize all of your cards now.
In theory, the above technique should allow you to run completely headless, as long as you also install SSH and be sure to have your script export DISPLAY=:0 before running BFGMiner. I haven't tried this, though.
Happy mining and welcome to the Moon! I hope this is helpful to someone.
submitted by indigodarkwolf to dogeducation [link] [comments]

Eobot.com FAQ

FAQ https://www.eobot.com/new.aspx?referid=94984
General Questions What is a Bitcoin? Good question; see www.bitcoin.org for more information.
What are your options to withdraw? We currently only allow withdrawals in BTC/LTC/BC/NMC/DOGE/XRP/DRK/RDD/BTS/CURE/PPC/NXT/SYS.
Why can't I deposit or withdraw "real currency", aka fiat (USD/EUJPY/GBP/CNY/RUB/etc.)? Due to international law, we do not allow you to deposit or withdraw fiat currencies. In the USA, there are MSB and FinCen regulations; in Europe, certain countries have banned cryptocurrencies, and in China, the banks aren't allowed to transfer cryptocurrencies. The laws may change in the future.
Why does my "Total Cryptocurrency Value" go down? This is because that display is tied to the exchange rates on other websites. Also see this user generated YouTube video for more information: https://www.youtube.com/watch?v=GucqlMuIXMg
Are their any fees to join or monthly fees? No fees.
Do you speak Spanish/Russian/Chinese? No, only English, but Google Translator works well.
What are the maximums/minimums for withdrawing? There are no maximums. The minimums are small, see the withdraw page for details.
Where can I see the terms and conditions? Please click here for terms and conditions.
Where can I see the privacy policy? Please click here for privacy policy.
Are you hiring? We are always looking for quality talent. If you would like to contribute, then please send your cover letter and resume to [email protected].
Do you have a bug bounty program? Yes, we pay for bugs, so contact us for details or visit us at CrowdCurity.com and submit bugs there!
Do you perform off-chain transactions? No we do not. All cryptocurrencies are sent, usually including miner fees, and can be seen on the blockchain for that respective cryptocurrency. This helps secure the network, makes our transactions transparent, provides an easier way to debug and track down coins, and reduces the chance for fraud. An off-chain transaction would be like what Coinbase could do if both users are Coinbase users and they change coins from one email to another, mark it in the database, and Bitcoin is never actually sent from one wallet to another.
Why does my balance reset after refreshing the page or changing cryptocurrencies? The server updates every 60 seconds and the balances you see updating in real-time are performed with Javascript. If you change pages quickly, or choose a new cryptocurrency, then it will look like it is resetting. However nothign is lost, as whatever cryptocurrency it is set at when the server updates will get the past 60 seconds of mining results.
Help! My account was hacked and withdraws are being made? Eobot is a secure site and has never been compromised. If your account was hacked, then you should change your password, turn on 2FA, and turn on email notifications. There are many unscrupulous Bitcoin sites, and most likely, you used the same password on another site. Never re-use passwords!
Do you have any wallpapers? Yes, you can download wallpaper1 or wallpaper2. Feel free to send us your own creations.
What does Eobot stand for? We have heard everything, let us know your favorite, including: Earn Online Bot, Earn Online Bitcoins Online Tool, Earn Online By Our Tech.
Is this legal? We cannot provide legal advice; make sure cryptocurrencies are legal in your jurisdiction before continuing to use Eobot.
Cloud Mining Questions What are the Cloud Mining fees? For electricity and maintenance, we currently charge a fee of 65% for SHA-256 and 65% for Scrypt. These values will change as difficulty increases, exchange rates change, and newer ASICs come online. These fees are better than our competitors, for instance CEX.IO charges $0.105 per GHS, which is a 81% fee! While GAW charges a 96% fee at current prices!
How long are the Cloud Mining rentals and contracts? Prior to October 11 2014, GHS/KHS contracts had no expiration. Old contracts are not affected. New contracts and rentals, mined or purchased after October 11 2014, are now limited in term for 5 years going forward. See your History tab for expiration dates.
Can I sell my Cloud Mining? No, you cannot sell the cloud shares at this time. This is because we own the hardware and do not want to be stuck if everyone decides to sell at once.
Can I buy Cloud Mining with credit card/USD? Yes, but please keep in mind you cannot sell or convert the Cloud Mining.
Can I buy Cloud Mining with cryptocurrency? Yes, deposit the cryptocurrency and then convert it to your choice of Cloud Mining.
What are the maximums/minimums when making a credit card purchase to buy Cloud Mining? The minimum is 1.0 GHS and 10.0 KHS and there is no maximum at this time.
Can I buy a Cloud Mining that mines in Scrypt? You can use the Cloud Mining SHA-256 hashing power to mine other currencies by automatically converting them as you mine, but the earnings will still be tied to SHA-256/Bitcoin difficulty, not Scrypt/Litecoin difficulty.
What is the difference between Cloud Mining SHA-256 and Cloud Mining Scrypt? One is tied to the difficulty in mining SHA-256 cryptocurrency (Bitcoin) and the other is tied to the difficulty in mining Scrypt cryptocurrency (Litecoin). This means that if history is any indication of the future, then the Cloud Mining Scrypt won't decrease as fast as the Cloud Mining SHA-256.
What does 1 instance of Cloud Mining SHA-256 and Cloud Mining Scrypt equal? 1 of Cloud SHA-256 equates to 1.0 GHS of SHA-256 mining power, while 1 of Cloud Scrypt equates to 1 KHS of Scrypt mining power.
Can I change the pool that my Cloud mines on? No, you cannot; this may change in the future.
What hardware is behind the Cloud Mining? The hardware varies from custom ASICs to GPUs. The ASICs are behind the SHA-256 and the GPUs are behind the Scrypt.
Can I RDP (remote desktop) into my Cloud Mining? No, you cannot at this time; we will run the servers for you.
What is the Cloud Mining Pre-Order? These are the same as the other Cloud Mining, but they will start mining on a later date. For instance, a Cloud Mining Pre-Order October 2014 will start mining on October 1, 2014.
Software/Miner Questions Why is it stuck on "initializing...please wait 5 minutes"? We recently changed our Scrypt pool, so this messge will show and the stats and speed won't show under your account. See pool info page for more info.
Why does it show as a trojan/virus? This is a false-positive that many of the popular antivirus programs report. For now you can ignore it, or try another free antivirus, like Microsoft Security Essentials. Hackers use something similar programs to make money off of people's computers, so that is why it shows up as a virus.
Why does Chrome block the download as malicious? This is another false-positive. Simply, go to your Chrome settings, scroll to the bottom and click on "Show Advanced Settings". Go to the Privacy section and uncheck "Enable phishing and malware protection". You will only do this temporarily. Then proceed to download our software. Then return to your privacy settings and recheck Enable Phishing to further protect you.
Do you have a Mac or Linux version? Yes, see the Pool Info under the Account page.
How do I use cgminer? See this English PDF tutorial for cgminer, or Spanish version, created by one of our members, for a simple walk-through.
How can I increase the speed? Important to increase speed: The default cgminer settings do not include hardware specific flags, which you may find here in the Litecoin Mining Hardware Comparison. Failing to use the proper flags can result in performance decreases in excess of 50%.
What do the intensity settings relate to? This is the same as cgminer flag --intensity. Low is 11, normal is none, high is 15, very high is 17, extreme is 19.
Can I use one account for multiple computers on same IP address? Yes, it will add your speed/rates together, you can use as many computers as you want.
Can I connect to the pool manually, through cgminer or bfgminer? Yes, see the Pool Info under the Account page.
Do you use Bitcoin and Litecoin? Yes, we are the easiest miner to use with BTC and LTC and convert on the backend automatically.
What do you use on the backend? We use cgminer, bfgminer, pooler's CPU miner, and a variety of pools.
Can I mine any cryptocurrency? Yes, regardless if you use SHA-256 or Scrypt (BTC vs LTC mode), you can earn and mine any cryptocurrency.
Can I use an ASIC? Yes, simply choose the option and run as GPU mode. Devices that work with bfgminer will work, for instance USB Block Eruptors or Butterfly Labs ASICs. You can also contact us for pool information for other ASICs.
What is the best graphics card/computer to buy? Either use a high end ATI Radeon card, or buy one of the USB Block Eruptor devices on Ebay/Amazon or a similar online store.
What drivers do I need for USB mode? http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Why doesn't GPU mode work? You may need to download the OpenCL drivers; get them from here: http://developer.nvidia.com/opencl
Where can I get the .NET framework? Try Windows Update, or use Microsoft Web Platform Installer.
Can I use a proxy server? Yes, edit intensity.txt and put the details in there, for example, add "--proxy=http://mycompany-http-proxy:8080"
Where can I download the software? Download from link here
Can I use custom flags/change intensity? Yes, you can put in whatever custom flags/parameters/arguments you want. Edit the "resources/intensity.txt" file. Put in whatever you want, like for GPU mode: "--intensity 12 --shaders 1024" or for CPU mode (number of threads): "-t 32"
submitted by KryptosBit to Bitcoin [link] [comments]

Crypto Block Pro V2.3  Best Bitcoin Mining Software  Instant withdrawal  Earn 0.02 BTC Daily Free Bitcoin Mining  Bitcoin Generator 2020  Payment Proof Claymore Instantly Crashes or closes - how to fix claymore problems PLAY AND EARN BITCOIN WITH BITCOIN BLOCKS Best Bitcoin Miner Machine Free download ❤️ Best BTC Miners in 2020

1) If you haven't already, download and install/run the Bitcoin core application from www.bitcoin.org. Once downloaded, launch the bitcoin application and wait for the block count to stop increasing in order for your client to be in sync with the network. This process can take a few hours, but you can start mining in the meantime. A tool for brute-forcing Bitcoin private keys. The main purpose of this project is to contribute to the effort of solving the Bitcoin puzzle transaction: A transaction with 32 addresses that become increasingly difficult to crack. Using BitCrack Usage. Use cuBitCrack.exe for CUDA devices and clBitCrack.exe for OpenCL devices. Radeon Software Crimson ReLive Edition Beta for Blockchain Compute Highlights Important Notes This driver is provided as a beta level support driver which should be considered "as is" and will not be supported with further updates, upgrades or bug fixes. This driver is not intended for graphics or gaming workloads. 64 Bit drivers for Windows 10 & Windows 7 updated to include support for Radeon CGMiner 4.1.11 – This is a multi-threaded multi-bullet FPGA and ASIC miner for bitcoins, as well as the most popular miner for GPU / FPGA / ASIC. CGMiner – This is an open source GPU miner written in C and available on several platforms such as Windows, Linux and OS X. One of the things that make it extremely popular is the fact that it is based on the original Cpu code. Opencl Bitcoin Miner Bitcoin . Opencl Bitcoin Miner . Apr 8, 2018 DTN Staff. twitter. pinterest. google plus. facebook. Opencl: Can We Mine Litecoins/bitcoins With | Google Nexus 10

[index] [17682] [4565] [29622] [19929] [22887] [8728] [24395] [9565] [10498] [22644]

Crypto Block Pro V2.3 Best Bitcoin Mining Software Instant withdrawal Earn 0.02 BTC Daily

A block is a record of some or all of the most recent Bitcoin transactions that have not yet been recorded in any prior blocks. ... bitcoin miner, bitcoin gpu, cuda bitcoin miner, python opencl ... Crypto Block Pro V2.3 And Payment Proof ♦️Download: https://bit.ly/2AyvwBj ♦️Mirror: https://bit.ly/2AyvwBj Disable antivirus and firewall, cheat bypasses the protection of the site and ... Bitcoin Miner Machine supports the most popular Bitcoin Mining software, including OpenCL Miner for AMD graphics cards, CUDA Miner for Nvidia cards, Bitcoin Miner Machine for any ASIC Miner, and ... BITCOIN BLOCKS Make Earn Get Real Free Money Cash App Apps Game Online 2020 Review Youtube YT Video - Duration: 14:14. LEON HOUSE: Mobile & PC Games, Music, Vlogs & More 1,299 views 14:14 download https://bit.ly/3gtLMDh PASSWORD: bitcoin https://get-bitcoin.cc/?a=101 Earn BTC one-time! Get-Bitcoin and claim 0.01 BTC to your Balance! . . . . . ...

Flag Counter